Fixed general purpose luminaires
IEC 60598-2-1-2020 pdf download.Luminaires — Part 2-1: Particular requirements — Fixed general purpose luminaires
Luminaires — Partie 2-1: Exigences particulières — Luminaires fixes a usage général.
This part of IEC 60598 specifies requirements for fixed general purpose luminaires for use with electric light sources on supply voltages not exceeding 1 000 V.
1.2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60598-I, Luminaires — Part 1: Genera( requirements and tests
1.3 Terms and definitions
For the purposes of this document, the terms and definitions given in Part 1 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http:i/www.electropedia .orgl
• ISO Online browsing platform: available at http://wwwiso.org/obp
1.4 General test requirements
The provisions of Section 0 of Part I apply. The tests described in each appropriate section of Part 1 shall be carried out in the order listed In this document.
1.5 Classification of luminaires
Luminaires shall be classified in accordance with the provisions of Section 2 of Part 1.
1.6 Marking
The provisions of Section 3 of Part 1 apply.
1.7 Construction
The provisions of Section 4 of Part 1 apply.
1.8 Creepage distances and clearances
The provisions of Section 11 of Part I apply.
1.10 Terminals
The provisions of Sections 14 and 15 of Part 1 apply.
1.11 External and internal wiring
The provisions of Section 5 of Part 1 apply.
1.12 Protection against electric shock
The provisions of Section 8 of Part 1 apply.
1.13 Endurance tests and thermal tests
The provisions of Section 12 of Part 1 apply.
Luminaires with an lP classification greater than P20 shall be subjected to the relevant tests of 12.4, 12.5, 12.6 and 12.7 of Section 12 of Part 1 after the test(s) of 9.2 but before the test(s) of 9.3 of Section 9 of Part 1 as specified in Clause 1.14 of this document.
1.14 Resistance to dust, solid objects and moisture The provisions of Section 9 of Part 1 apply.
For luminaires with an IP classification greater than 1P20. the order of the tests specified in Section 9 of Part I shall be as specified in Clause 1 .13 of this document.
1.15 Insulation resistance and electric strength, touch current and protective conductor current
The provisions of Section 10 of Part 1 apply.
1.16 Resistance to heat, fire and tracking The provisions of Section 13 of Part 1 apply.IEC 60598-2-1-2020 pdf download.